Quick Reference Guide

278 Summary of SYSCFG and RAIDCFG Options
RAIDCFG Options
Table E-1 lists all the RAIDCFG options and gives a brief description of these options. For details on
these options, see the "RAIDCFG" chapter.
Table E-2. RAIDCFG Short and Long Format Options
Option Valid Arguments Short Description Mandatory or
Optional
No option
-h
-?
or
/?
NA Displays general usage information for the utility.
The usage information consists of a comprehensive
list of valid options, parameters, and arguments.
Optional.
See Table 4-1 for
specific usage
information.
-ac
or
action
cvd
or
createvdisk
Creates a virtual disk.
NOTE: When providing multiple physical disks for the
createvdisk command, do not separate the disks with
spaces. For example, -ad=1:4, 1:5 causes an
error. The correct syntax for displaying multiple
physical disks is -ad=1:4,1:5,1:6.
See Table 4-4 for
specific usage
information.
-ac
or
action
dvd
or
deletevdisk
Deletes a virtual disk. See Table 4-7 for
specific usage
information.
-ad
or
adisk
NA Specifies an array disk command. See Table 4-5 for
specific usage
information.
-ad
or
adisk
ch:targ, ch:targ, ...
or ch:targ:lun,...
or ch:targ:enc
channel:target, or
channel:target:lun, or
channel:target:enclosure
Specifies an array disk.
For SCSI controllers, the value of lun should always
be 0.
For SAS controllers, the value of enclosure can be
non-zero, in which case you need to specify values for
channel, target, and enclosure.
NOTE: You can also use pdisk or -pd instead of adisk or
-ad to specify an array disk.
Optional.
See Table 4-5 for
specific usage
information.
-c
or
controllerid
<valid controller ID
number>
Specifies a RAID controller. See Table 4-3 for
specific usage
information.