Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 269
--noraidprompt* none Disables the POST prompt message
when the SCSI controller type is
changed.
NOTE: The asterisk is not part of the
command syntax.
No
--numlock on, off Enables or disables the keyboard
number lock.
Yes
--oldsetuppwd <string> Confirms the existing setup password
when setting a new setup password.
No
--oldsyspwd <string> Confirms the existing system password
when setting a new system password.
No
--osmode enable, disable Enables or disables the operating
system installation mode.
Yes
--ovrwrt* none Overwrites the file contents when used
with the -o option.
NOTE: The asterisk is not part of the
command syntax.
No
--powerbutton enable, disable Enables or disables the front bezel
power button.
Yes
--pwdlock lock, unlock Enables or disables the ability to set
the system password.
No
--redmem off, spare, mirror,
raid
Sets the redundant memory mode.
If you perform operations that change
the --redmem option, you must
immediately reboot the system. This
applies to command line usage as well
as --infile usage. Additionally, the --
redmem option should not be issued
with any other command and should be
immediately followed by a system
reboot. This is important when you
develop scripts that can alter the --
redmem setting.
Yes
--rptkeyerr enable, disable Enables or disables the reporting of
keyboard errors during POST.
Yes
--sata0 auto, off Enables or disables SATA port 0.
NOTE: This option maps to --sata_a for
PowerEdge x9xx systems.
Yes
Table E-1. SYSCFG Options (continued)
Options Suboptions Valid Arguments Description Replicated