Quick Reference Guide

268 Summary of SYSCFG and RAIDCFG Options
--integratedraid enable, disable Enables or disables the integrated
RAID controller.
Yes
--integratedsas enable, disable Sets the behavior for the integrated
SAS controller.
Yes
--lcd default, none,
user
Selects whether to display the default
string (model name and number) or a
user-defined string in the front-panel
LCD (Liquid Crystal Display).
Yes
--lcd1 <string> Sets the first line of user-defined LCD
strings.
NOTE: Before setting user strings for
this option, ensure that --lcd is set to
user.
NOTE: If you have a Dell™
PowerEdge™ x6xx, x7xx, or x8xx system,
you need to reboot your system for the
settings to take effect.
Yes
--lcd2 <string> Sets the second line of user-defined
LCD strings.
NOTE: Before setting user strings for
this option, ensure that --lcd is set to
user.
NOTE: If you have a Dell™
PowerEdge™ x6xx, x7xx, or x8xx system,
you need to reboot your system for the
settings to take effect.
Yes
--logicproc enable, disable Enables or disables the logical
processor (Hyperthreading).
Yes
--lpt disable, lpt1, lpt2,
lpt3
Disables or sets the parallel port
address.
Yes
--lptmode at, ps2 Sets the parallel port mode. Yes
--mem* none Reports the size of system memory.
NOTE: The asterisk is not part of the
command syntax.
Yes
--memintleave enable, disable Enables or disables the memory
interleave mode.
Yes
--memtest enable, disable Enables or disables the power-on self-
test (POST) extended memory test.
Yes
Table E-1. SYSCFG Options (continued)
Options Suboptions Valid Arguments Description Replicated