Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 267
--embnics on, off Enables or disables the embedded
NICs.
Yes
--embnic1pxe enable, disable Enables or disables
Pre-boot eXecution
Environment
( PXE) on the first
embedded NIC.
Yes
--embnic2pxe enable, disable Enables or disables PXE on the second
embedded NIC.
Yes
--embsataraid off, combined,
ata, raid
Configures the embedded SATA
(Serial Advanced Technology
Attachment) RAID controller.
Yes
--embscsi1 on, off Enables or disables the first SCSI
controller.
Yes
--embscsi2 on, off Enables or disables the second SCSI
controller.
Yes
--embscsiraid raid, off, scsi
or
raid, off
Enables or disables the embedded
SCSI RAID controller.
Yes
--embscsiraidchb raid, scsi Sets the second channel of the
embedded SCSI RAID controller to
operate in RAID or SCSI mode.
Yes
--extserial com1, com2, rad Sets the behavior of the external serial
connector.
Yes
--floppy auto, off,
readonly
Enables or disables the diskette drive
controller.
Yes
--fsbr 115200, 57600,
19200, 9600
Sets the console redirection fail safe
baud rate.
Yes
--hwprefetcher enable, disable Enables or disables hardware
prefetching by the processor.
Yes
-i
or
--infile
<filename> Reads BIOS configuration options
from a file. A file can be generated with
the -o option.
No
--idecdrom auto, off Enables or disables the CD drive
controller.
Yes
--idectrl auto, off Enables or disables the IDE controller. Yes
Table E-1. SYSCFG Options (continued)
Options Suboptions Valid Arguments Description Replicated