Quick Reference Guide

266 Summary of SYSCFG and RAIDCFG Options
--adjcacheprefetch enable, disable Enables the processor to fetch the
cache line containing the currently
requested data and prefetch the
following cache line or fetch only the
cache line containing the currently
requested data.
Yes
--assignintr standard,
distributed
Controls the interrupt assignment of
PCI devices in the system.
--asset <string> Sets the asset tag value. Yes
--bootseq numerical list,
separated by
commas
or
list of device
names, separated
by commas
Sets the boot order. Yes (for
systems
that
support a
list of
device
names
only)
--conboot enable, disable Enables or disables console redirection
after boot.
Yes
--conred off, serial1,
serial2, bmcsol,
mmb
Sets console redirection to a particular
port.
Yes
--conterm vt100, ansi Sets console redirection terminal type. Yes
--dbpm enable, disable Enables or disables demand-based
power management.
Yes
--devseq numerical list,
separated by
commas
or
list of device
names, separated
by commas
Sets the boot order for hard drives.
NOTE: This option appears only if your
system is configured with two or more
bootable storage controllers. If your
system is not configured with bootable
storage controllers and this option is
included in the configuration file, the
utility generates a usage error.
Yes (for
systems
that
support a
list of
device
names
only)
--embideraid on, off Enables or disables the embedded IDE
RAID controller.
Yes
--embnic1 on, off, onnopxe Enables or disables the first embedded
network interface controller (NIC).
Yes
--embnic2 on, off, onnopxe Enables or disables the second
embedded NIC.
Yes
Table E-1. SYSCFG Options (continued)
Options Suboptions Valid Arguments Description Replicated