Quick Reference Guide

236 Messages and Codes
214 Invalid size given! size=max or -sz=max is not supported for
this RAID controller.
215 The value given for envname or -envn is null or too long.
216 Invalid virtual disk size!
217 The strict option provided failed! Virtual disk is not
created.
218 Unable to determine optimum size for Virtual disk. Ensure
that the array disks are of the same protocol (i.e. SAS, SATA,
SCSI). If there is a mismatch of the array disks then the
RAIDCFG will not be able to determine the optimum size. In
addition, also ensure that there is drive size available for
the specified virtual disk.
219 One or more array disks selected to create virtual disk or
hotspare doesn't have enough disk space. Please make sure
that all the array disks and failover drives selected have
enough free space.
220 The number of array disks provided is incorrect for the
requested RAID Type! RAID 1 requires exactly 2 array disks,
RAID 5 requires at least 3 array disks, RAID 10 requires at
least 4 array disks and RAID 50 requires at least 6 array
disks.
221 Input file cannot be read.
222 Input file not found.
223 Error in opening the file.
Table B-5. RAIDCFG Error Codes and Messages (continued)
Error Code Message