Quick Reference Guide

222 Messages and Codes
68 The BIOS version information is not available.
69 There is not enough free system memory to complete the BIOS update.
70 The BIOS update file version is a different version class (A00,
X00) than the current system BIOS. Use the --force option to use
this BIOS image.
71 The BIOS update file version is older than the current system bios.
Use the --force option to use this BIOS image.
72 The BIOS update file version is identical to the current system
bios. Use the --force option to use this BIOS image.
73 The sequence list must be a comma-separated numerical list of valid
unique boot device numbers (ex: 2, 1, 3).
74 The sequence list must be a comma-separated list of valid unique
device names (ex: nic.emb.1, hdd.emb.1) or a comma-separated
numerical list of valid unique boot device numbers (ex: 2, 1, 3).
75 There was an error setting the sequence.
76 The list is not formatted correctly. See the help for more details.
77 The size of returned buffer is larger than the size of allocated
buffer.
78 There was a problem getting the state byte.
79 The state byte is not available on this system.
80 There was a problem setting the state byte.
81 The state byte must be a value between 0 and 255 decimal.
82 The CPU information is not available.
83 The dependent option required for this subcommand is missing in the
command line.
84 Duplicate sub command has been entered.
85 The script file does contain not a valid DTK environment script
signature.
86 The format of the environment variable is incorrect.
87 The --envar option can only be used for a single option.
88 The --envar option can only be used for report operations.
89 The individual sub commands should be specified for the -s option.
90 Getting external serial connector settings failed.
Table B-1. SYSCFG Error Codes and Messages (continued)
Error Code Message