Quick Reference Guide

Messages and Codes 221
41 Request data length invalid.
42 Request data field length limit exceeded.
43 Requested Sensor, data, or record not present.
44 Request data truncated.
45 Command response could not be provided.
46 Command response could not be provided. BMC initialization or
initialization agent in progress.
47 Command response could not be provided. Device in firmware update
mode.
48 Command response could not be provided. SDR Repository in update
mode.
49 Cannot execute command, SEL erase in progress.
50 Attempt to set the 'set in progress' value when not in the 'set in
complete' state.
51 The SOL character accumulate interval is invalid.
52 The SOL character send threshold is invalid.
53 The SOL retry interval is invalid.
54 Command completed successfully.
55 Time-out while processing command. Response unavailable.
56 Unspecified error.
57 The password may only contain printable ASCII characters.
58 Username cannot exceed 16 characters.
59 Invalid VLANID value. Enter in dddd format.
60 Attempt to write read-only parameter.
61 BMC is busy.
62 Response data did not return successfully.
63 BMC time out error.
64 Option requires an argument.
65 The asset tag for this system is not available.
66 The asset tag cannot be more than 10 characters long.
67 The required BIOS interfaces cannot be found on this system.
Table B-1. SYSCFG Error Codes and Messages (continued)
Error Code Message