Quick Reference Guide

DRAC III and DRAC 4 Property Database Group and Object Definitions 193
Default
0x12C seconds (5 minutes)
Description
Defines the Secure Shell (SSH) idle time-out. This property sets the amount of time in seconds that a
connection is allowed to remain idle (there is no user input). The session is cancelled if the time limit set
by this property is reached. Changes to this setting do not affect the current session (you must log out
and log in again to make the new settings effective).
cfgSerial
This group contains configuration parameters for the system external serial port.
One instance of the group is allowed. The following subsections describe the objects in this group.
cfgSerialBaudRate (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: For best results redirecting BIOS System Setup screens, Dell recommends using 115200.
Legal Values
9600, 28800, 57600, 115200
Default
115200
Description
Sets the baud rate on the external serial port. (Type decimal values).
cfgSerialConsoleEnable (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
Boolean, either 1 or 0 (TRUE or FALSE).
Default
0
Description
0=Disabled, 1=Enabled. Enables the serial port and terminal interface.