Quick Reference Guide

192 DRAC III and DRAC 4 Property Database Group and Object Definitions
cfgSessionManagement
This group contains parameters to configure the number of sessions that can connect to the DRAC 4.
One instance of the group is allowed. All objects in this group require a DRAC 4 reset before they
become active. The following subsections describe the objects in this group.
cfgSsnMgtMaxSessions (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
0x1 through 0x4
Default
0x4
Description
The maximum number of simultaneous sessions that are allowed at one time from the DRAC 4
Web-based remote access interface. (Type hexadecimal values.)
cfgSsnMgtMaxSessionsPerUser (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
0x1 through 0x4
Default
0x4
Description
The maximum number of simultaneous sessions allowed per user. (Type hexadecimal values.)
cfgSsnMgtSshTelnetIdleTimeout (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
0x0 through 0x780 seconds (0-32 minutes)
0 = No time-out