Quick Reference Guide

DRAC III and DRAC 4 Property Database Group and Object Definitions 167
NOTICE: Although these parameters can be configured, it is recommended that you not use any other settings than
those detailed here. Other settings may adversely affect the RAC's ability to communicate with other network nodes.
Following the modification of the network tuning, the RAC must be reset for the new tuning values to
take effect. After the RAC has been reset, it should be available for use in a normal or satellite network
configuration.
cfgOobSnmp
The group contains parameters to configure the SNMP agent and trap capabilities of the RAC.
One instance of the group is allowed. All objects require a RAC reset before they become active.
The following subsections describe the objects in this group.
cfgOobSnmpTrapsEnable (Read/Write)
Valid Values
Boolean, either 1 or 0 (TRUE or FALSE).
Default
1
Description
0=disable, 1=enable transmission of SNMP traps.
cfgOobSnmpAgentEnable (Read/Write)
Valid Values
Boolean either 1 or 0 (TRUE or FALSE).
Default
0
cfgNetTuningTcpSrttBase 0 0x100
cfgNetTuningTcpSrttDflt 0x6 0x180
cfgNetTuningTcpReXmtMin 0 0
cfgNetTuningTcpReXmtMax 0x80 0x400
cfgNetTuningTcpMsl 0x3c 0xf0
Table A-1. RAC Properties for Satellite Connectivity (continued)
Property Normal Value Satellite Value