Quick Reference Guide

DRAC III and DRAC 4 Property Database Group and Object Definitions 161
Description
Terminates text console redirection when using VT-100.
cfgSerialConsoleIdleTimeout (Read/Write)
Valid Values
Integer from 1 to any positive number. (Enter hexadecimal values.)
Default
0x12c
Description
The maximum amount of line idle time (in seconds) before the line is disconnected. (Enter hexadecimal
values.)
cfgSerialConsoleShellType (Read/Write)
Default
Default 2 except for the DRAC III; 1 for the DRAC III
Valid Values
1=DRAC III style VT-100 block screen interface; has limited command function compared to type 2
2=UNIX
®
-style command line data stream interface.
3=dial-in to UNIX-style command line data stream interface. (An external modem must be attached to
the external serial port [for the DRAC III this port is the serial cable.])
4=PPP dial-in through an external modem. (An external modem must be attached to the external
serial port [on DRAC III this is the serial cable.])
cfgSerialConsoleNoAuth (Read/Write)
Description
Allows user to disable authentication on serial shell.
Default
0
Valid Values
0=log-in prompt is Enabled on the serial shell.
1=log-in prompt is Disabled on serial shell.