Quick Reference Guide

DRAC III and DRAC 4 Property Database Group and Object Definitions 157
cfgDemandDialPppPassword (Read/Write)
Valid Values
A string of up to 31 ASCII characters.
Default
""
Description
Password for PPP authentication.
cfgAuthType (Read/Write)
Valid Values
0, 1, 2
Default
0x0
Description
PPP authentication type; 0=Any (including clear text), 1=CHAP, 2=MS CHAP (MS CHAP is not
supported.) (Enter hexadecimal values.)
cfgDialinUsers
This group contains parameters to configure the dial in PPP authentication capability of the DRAC III.
NOTE: This object group is for the DRAC III controller only.
Sixteen instances of the group are allowed, where each index represents a single PPP dial-in user. All
objects in this group require a RAC reset to become active. The following subsections describe the
objects in this group.
cfgDialinUsrPppUserName (Read/Write)
Valid Values
A string of up to 15 ASCII characters.
Default
""