Quick Reference Guide

DRAC III and DRAC 4 Property Database Group and Object Definitions 143
Description
Static IP base address for PPP. When static addresses are enabled, two IP addresses are used. The first is
the base, and the second is base+1. When the base IP address is 0.0.0.0, cfgDialupDialInDfltIpAddr is
used instead.
For more information, see the Dell™ Remote Access Controller Installation and Setup Guide.
cfgDialupDialInDfltIpAddr (Read/Write)
Valid Values
A string of "." separated numeric fields containing the IP address.
Default
Autogenerated
Description
Statically configures the IP base address for PPP. Used when either cfgDialupDialInBaseIpAddr is 0 or
when DHCP fails to obtain IP addresses from the DHCP server (only when DHCP is enabled using
cfgDialupDialInDhcpEnable). When set to 0.0.0.0, a unique address on the 10.0.0.0 network is
autogenerated.
You can use this command to avoid the issue described in "Accessing the DRAC III From a Dial-In
Client Running Red Hat
®
Enterprise Linux
®
(With PPP-2.3 or Later)" in the Dell Remote Access
Controller Installation and Setup Guide.
cfgDialupDiIdleTimeout (Read/Write)
Default
0x3C (60 seconds)
Description
0=infinite, otherwise, when the line is idle for this many seconds, the line is disconnected.
(Enter hexadecimal values.)
cfgDialupDiMaxConnectTime (Read/Write)
Default
0x0
Description
0=infinite, otherwise, the maximum time in seconds that the link will stay connected before the
connection is terminated. (Enter hexadecimal values.)