Quick Reference Guide

DRAC III and DRAC 4 Property Database Group and Object Definitions 135
DRAC III and DRAC 4 Property Database Group
and Object Definitions
The Dell Remote Access Controller (DRAC) III and DRAC 4 property database contain the
configuration information for the DRAC III and DRAC 4 controllers respectively. Data is organized
by associated object, and objects are organized by object group. The IDs for the groups and objects
that the property database supports are listed in this section.
Use the group and object IDs with the RACADM utility to configure the DRAC III and DRAC 4
controllers. The following sections (separate for DRAC III and DRAC 4), describe each object and
indicate whether the object is readable, writable, or both.
NOTICE: Object and group IDs in this section are system specific. Some may not be applicable to
your system.
DRAC III
idRacInfo
This group contains display parameters to provide information about the specifics of the RAC
being queried.
One instance of the group is allowed. The following subsections describe the objects in this group.
idRacType (Read Only)
Valid Values
0=invalid, 1=other, 2=unknown, 3=DRAC III, 4=all other RACs
Default
0x3 or 0x4
Description
Identifies the type of RAC.