Quick Reference Guide

RACADM 133
Input
Output
A message is displayed indicating the values obtained from the managed system, and if they are being
written to the RAC or only displayed.
Examples
• racadm setrac -d
Only the parameter values are displayed.
• racadm setrac -h
The UTC time and managed system name are taken from the managed system and written to the
RAC.
Table 6-24. setrac Subcommand Options
Option Description
-h Gets the Hostname from the managed system and writes it to the RAC. This parameter is available
for viewing using the getsysinfo command, and under the object ID interface using config/getconfig as
[ifcRacManagedNodeOs] ifcRacMnOsHostname.
-o Gets the OS Name from the managed system and writes it to the RAC. This parameter is available for
viewing under the object ID interface using config/getconfig as [ifcRacManagedNodeOs]
ifcRacMnOsName.
-T Gets the OS Type from the managed system and writes it to the RAC. This parameter is available
for viewing using the getsysinfo command and under the object ID interface using config/getconfig as
[ifcRacManagedNodeOs] ifcRacMnOsOsType.
-d The -d, or display option, allows the user to get the UTC time,
Hostname, OS Name, and OS Type
from the managed system and display these items only. Parameters are not written to the RAC. If the
-d option is entered along with other options, then those parameters are displayed only.