Quick Reference Guide

RACADM 127
Examples
• racadm getsysinfo -A -w -s
"123456" "PowerEdge 1650" "A08" "EF23VQ-0023" "" 0x100 "Server1"
"Microsoft Windows 2000 version 5.0, Build Number 2195, Service Pack
2" "1.60"
"Watchdog Info:" 2 39 40
• racadm getsysinfo -w -s
System Information:
System ID = 123456
System Model = PowerEdge 1650
BIOS Version = A08
Asset Tag = EF23VQ-0023
Service Tag = 2MP9Z01
Hostname = Server1
OS name = Microsoft Windows 2000 version 5.0,
Build 2195 Service Pack 2
ESM Version = 1.60
Watchdog Information:
Recovery Action = Power Down
Present countdown value = 36
Initial countdown value = 40
getraclog
NOTICE: The system may hang if this command is run. You may have to powercycle the server if it hangs.
NOTE: To use this command, you must have Log In DRAC 4 permission.
Table 6-16 describes the getraclog command.
Table 6-16. getraclog
Command Definition
getraclog -i Displays the number of entries in the DRAC 4 log.
getraclog Displays the DRAC 4 log entries.