Quick Reference Guide

120 RACADM
Input
Output
This subcommand generates error output upon encountering either of the following:
• Invalid syntax, group name, object name, index, or other invalid database members
• RACADM utility transport failures
If errors are not encountered, this subcommand displays the contents of the specified configuration.
Examples
• racadm getconfig -g cfgLanNetworking
Displays all of the configuration parameters (objects) that are contained in the group
cfgLanNetworking .
• racadm config -g cfgLanNetworking -o cfgNicIpAddress 10.35.10.100
Sets the cfgNicIpAddress configuration parameter (object) to the value 10.35.10.110. This IP address
object is contained in the group
cfgLanNetworking .
Table 6-8. getconfig Subcommand Options
Option Description
-f The -f <filename>, or filename option, causes getconfig to create the file <filename>. It then reads all
the configuration data from the RAC and places it into the file <filename>. The created file is a format
that can be used with the racadm config -f <filename> command.
-p The -p, or password option, causes getconfig to include password information in the file for all passwords
except for the user passwords (which are stored encrypted and cannot be decrypted).
A # cfgUserAdmPassword line is displayed as an indication that the password is present, but password
text is not displayed.
-g The -g <groupName>, or group option, can be used to display the configuration for a single group.
The groupName is the name for the group used in the racadm.cfg files. If the group is an indexed group,
use the -i option.
-h The -h, or help option, displays a list of all available configuration groups so the user may enter the
desired group. This option is useful when you do not remember exact group names.
-i The -i <index>, or index option, is valid only for indexed groups and can be used to specify a unique
group. The <index> is a decimal integer from 1 through 16. If -i <index> is not specified, a value of 1 is
assumed for groups, which are tables that have multiple entries. The index is specified by the index value,
not a “named” value.
-u The -u <username>, or user name option, can be used to display the configuration for the specified user.
The <username> option is the log in user name for the user.