Quick Reference Guide

114 RACADM
RACADM Options
Table 6-1 lists the options and arguments for the RACADM utility that apply to deployment. For more
information about the valid RACADM options, see "RAC Configuration Utility Options, Subcommands,
and Arguments."
NOTE: Some of the following options or arguments might not be available on all systems.
Table 6-1. RACADM Options
RACADM
Options and
Arguments
RACADM
Subcommands
Short Description
-i NA Tells the RACADM utility to interactively query the user for the user's user
name and password.
-l<integer> NA Specifies the log level for debug. See "Log/Verbose Levels."
NOTE: Ensure that you run this option from a writable folder.
-L<filename> NA Specifies the location for the debug log file.
-p<password> NA Specifies the password used to authenticate the command transaction. If the
-p option is used, the -i option is not allowed.
-u<username> NA Specifies the user name that is used to authenticate the command transaction.
If not specified, the default user name racadmusr is used. If the -u option is
used, the -p option must be used, and the -i option (interactive) is not allowed.
-v<integer> NA Specifies the verbose level for screen output. See "Log/Verbose Levels."
NA config Configures the RAC. See "config/getconfig" for more information about the
subcommand options and arguments.
NA fwupdate Updates the firmware on the RAC. See "fwupdate" for more information about
the subcommand options and arguments.
NA getconfig Gets the RAC configuration data. See "config/getconfig" for more information
about the subcommand options and arguments.
NA getssninfo Retrieves session information for one or more currently active or pending
sessions from the Session Manager's session table. See "getssninfo" for more
information about the subcommand options and arguments.
NA getsysinfo Retrieves session information for one or more currently active or pending
sessions from the Session Manager's session table. See "getsysinfo" for more
information about the subcommand options and arguments.
NA help Lists all of the subcommands available to use with the RACADM utility and
provides a short description for each. See "getraclog" for more information
about the subcommand options and arguments.
NA localauthenticate Enables or disables the local operating system authentication.