Quick Reference Guide

100 RAIDCFG
Table 4-9. Function Calls of the setenvironment Option
Function Call Description
getfirmware Returns the firmware version of the specified controllers.
Example:
A:>raidcfg -se -envn=FIRMWARE -envc=getfirmware -c=2
FIRMWARE=531T
RAIDCFG command successful!
getcontrollertype Returns
LSI for LSI controllers and ADAP for Adaptec controllers.
Example:
A:>raidcfg -se -envn=CONTROLLERTYPE -envc=getcontrollertype -c=2
CONTROLLERTYPE=LSI
RAIDCFG command successful!
getadisks Returns the array disks attached to the controller.
Example:
A:>raidcfg -se -envn=ADISKS -envc=getadisks -c=2
ADISKS=0:0:1,0:1:1,0:2:1
RAIDCFG command successful!
getfreeadiskcount Returns the number of free array disks found in the specified controller.
Example:
A:>raidcfg -se -envn=FREEADISKCOUNT -envc=getfreeadiskcount -c=2
FREEADISKCOUNT=2
RAIDCFG command successful!
getfreeadisksize Returns the total size of the free array disks in megabytes.
Example:
A:>raidcfg -se -envn=FREEADISKSIZE -envc=getfreeadisksize -c=2
FREEADISKSIZE=15346
RAIDCFG command successful!