Owner's Manual

file:///T|/htdocs/SOFTWARE/dtk/2.3/Readme/readme_linux.txt[10/23/2012 9:52:54 AM]
booted. You can log in as "root" without a password. This is done
so that scripts can be debugged easily. However, it could be a
security issue to leave the CD booted on a system.
======================================================================
TOOL NOTES
======================================================================
* SYSCFG:
- Some options may not be present on all systems, which may
be due to the BIOS version or hardware feature set. The usage
information generated by running SYSCFG without arguments shows
only those options that are valid for your system.
- The "--devseq" option is present only if you have an
available, bootable hard-disk partition. If this option is
present in the configuration file, but not present on your
system, you will receive a usage error.
- If you perform operations that change the "--redmem"
option, reboot the system immediately. This is applicable
to command line usage as well as "--infile" usage.
NOTE: Additionally, the "--redmem" option should not be
issued with any other command and should be
immediately followed by a system reboot. This is
important when you develop scripts that can alter
the "--redmem" setting.
- For options that use text strings such as username,
password, hostname, and community string, using characters
such as <space>, "<," ">," "|," "=" on the command line can be
misinterpreted by the command line parser and may cause errors.
To avoid such errors, use only alphanumeric characters.
- An option for Demand-based power management has been added.
- A "--solaction" option has been added for PowerEdge x9xx
systems. This option enables or disables Serial Over LAN
(SOL) access for a particular user.
Suboptions Valid Arguments
------------------------------------
--userid Userid(2-16)
--action enable,disable
- A "--memintleave" option has been added which can enable or
disable memory interleave mode. Valid arguments are
<enable,disable>.