Users Guide

• Disable

java –jar dell_OMC_ITNM_ConfigUtility_v_3_0.jar -<option>=<value>

For example:

java –jar dell_OMC_ITNM_ConfigUtility_v_3_0.jar -monitorinband=enable

java –jar dell_OMC_ITNM_ConfigUtility_v_3_0.jar -monitorinband=disable

NOTE: If an ESXi system has IPv4 and IPv6 addresses and both of them are discovered, the

addresses appear as different managed nodes under the

Dell OEM Devices → Servers → ESXi

Servers

. You can avoid the redundant service tag by excluding these IP addresses in the discovery

configuration.

If the IPv6 address of a Dell OEM server running ESXi is configured as a seed in ITNM IP Edition, then

the trap association will not occur. To view the trap association, discover the Dell OEM servers

running ESXi using an IPv4 address.

Discovering and classifying 10th to 13th generation of

Dell PowerEdge servers

To discover Dell PwerEdge servers, ensure that the DellServerSNMP discovery agent is enabled for

discovering Dell servers running Windows and Linux operating systems and the DellServerWsman

discovery agent is enabled for servers running VMware ESXi operating systems.

The discovered Dell servers are classified under the following class names:

• DellServerMonolithicLinux — For monolithic servers running Linux operating systems

• DellServerModularWindows — For modular servers running Windows operating systems

• DellServerModularLinux — For modular servers running Linux operating systems

• DellServerMonolithicWindows — For monolithic servers running Windows operating systems

• DellServerModularESXi — For modular servers running ESXi operating systems

• DellServerMonolithicESXi — For monolithic servers running ESXi operating systems

In the left pane on the Tivoli Integrated Portal (TIP), click Availability → Network Availability → Network

Views → Dell Managed Systems. The Dell Managed Systems pane is displayed on the right-hand side.

For more information, see Viewing Dell devices.

NOTE: If you are discovering Dell PowerEdge servers or Dell PowerVault NX Storage Arrays running

ESXi version 5.5 or later, configure the environment variable DELL_OMC_ITNM_JAVA_PATH using

JRE version 1.6.0_18 (6u18) or later.

By default, for the 12th or later generation of Dell PowerEdge servers, Dell PowerVault NX Storage Arrays,

or Dell workstations in-band server discovery is enabled. When you use both in-band and OOB discovery

methods for those devices, they may create redundant information. You can avoid the redundant

information by disabling the in-band discovery. The discovery can be controlled using a configured value.

The discovery and classification is based on the values:

• Enable

• Disable

java –jar dell_OMC_ITNM_ConfigUtility_v_3_0.jar -<option>=<value>