Users Guide
Alert Group Description
CPClient Provides information about the Captive Portal Client state.
DAI Provides status information about the Dynamic ARP Inspection.
DHCP Provides status information about the Dynamic Host Conguration Protocol (DHCP)
operation state while assigning IP addresses.
DVMRP This signies the loss of a 2-way adjacency with a neighbor.
Fan Provides information on how well a fan is functioning. Fan alerts provide status
information of fans.
Ifstate This signies that there has been a change in the state of an IPv6 interface.
IGMP Provides information about the Internet Group Management Protocol (IGMP).
Initialization Provides information about the initialization phase of the switch.
Link Provides the link related information.
LLDP Provides information on controlling the transmission of LLDP notications.
LockedPort Provides information about blocked switches.
MAU Provides information whenever a managed repeater MAU enters the Jabber state.
OSPF This signies that an OSPF packet has been received on a non-virtual interface that
cannot be parsed.
PacketPolicy Provides status information when packets have been forwarded or dropped.
PortState Provides the Port State change information.
PortStatus Provides status information for the ports with either an Authorised or Unauthorized
message.
PowerSupply Provides status information of the power supplies.
Repeater Provides information whenever a managed interface MAU enters the Jabber state.
ResourceOverow Provides status information for switch hardware or software resource overow.
Stacking Provides information about the stack status.
STP Provides information about any changes in the Spanning Tree Protocol.
SFP Provides information about any changes in the Small Form Pluggable (SFP) Protocol.
Temperature Provides temperature statistics information of the switch.
TFTP Provides information about the status of the Trivial File Transfer Protocol.
Threshold
Provides Information when an alarm entry crosses its rising threshold and generates an
event that is congured for sending SNMP Traps. This notication is generated when
the value of entLastChangeTime changes. It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls.
TrunkPort Provides status information when a port has been added or deleted.
UserLogin Provides information about the users logged in.
VLAN Provides information about the switch Virtual Local Area Network.
VRRP Provides information about any changes in the Virtual Router Redundancy Protocol
entries.
XFP Provides information about the operational status of the Small Form Factor Pluggable
Transceiver.
Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 29