Users Guide
Alert Group Description
Snapshot Provides information for the snapshot group. Snapshot alerts provide status information of the
snapshot repository capacity, snapshot virtual disk repository, creation of the snapshot image, and
rollback of the snapshot.
StorageArray Provides information of the storage array security key.
SystemConguration Provides validity information of the storage array system conguration.
Temperature Provides threshold status information of the temperature sensor.
UnreadableSector Provides information about the unreadable sector database.
VirtualDisk Provides information about the virtual disk tasks. Virtual disk alerts provide information about the
virtual disk capacity, status, reconguration, write back caching force status, data/parity status,
and path.
Dell Enterprise Switches (S-Series, Z-Series, M-Series, and C-
Series) Alert Groups
The Dell Enterprise Switches alerts are the events generated by Dell S-Series, Z-Series, M-Series, and C-Series and displayed on the
Netcool/OMNIbus console. The following table lists the Dell Enterprise Switches alert groups.
Table 26. Dell S-Series, Z-Series, M-Series, and C-Series Switch Groups
Alert Group Description
AccessControlLists Provides status information arising from problems during installation of the Access Control Lists
entries due to a hardware failure or a lack of storage space.
Adjacency Provides information due to Adjacency related changes.
BGPTask Provides information about the status of the Border Gateway Protocol.
Card Provides information about the Card operation status.
Controller Provides information about the Controller operation status.
CopyCong Provides information when a Copy operation is completed.
ETSModule Provides any change in the ETS Module status.
ETSStatus Provides the Enhanced Transmission Selection operation status.
Fan Provides information about how well a fan is functioning.
FanTray Provides information about the status of the fan tray.
FCOENodes Provides information about the threshold status of the FCOE Nodes.
FiberChannelForwarders Provides information about the threshold status of the ber channel forwarders.
FlowTable Provides information about the ow table status.
LACPState Provides a change in the LCAP state for one of the member ports of the aggregation link detected
by an agent.
MAC Provides status information about a MAC address.
Memory Provides Memory Utilization status.
PFCStatus Provides information about Priority-based Flow Control operation.
PowerSupply Provides the power supply information of the system.
Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 27