Users Guide
Alert Group Description
DiskPool Provides status information for the disk pool. DiskPool alerts provide information about the
incompletion, failure or removal of the disk pool.
Drawer Provides status information for the drawer. The alerts provide information if the drawer is open,
removed, failed, not supported, or degraded.
EMM Provides status of the Enclosure Management Module (EMM) of the controllers.
Enclosure Provides status of the components in the enclosures. Enclosure alerts provide the status
information of enclosure, alarm, asset tag, service tag, and so on.
Fan Provides information on how well a fan is functioning. Fan alerts provide status information of fans
in a particular enclosure.
Feature Provides status information for the premium feature. The alerts provide information if the premium
feature is out of compliance or has exceeded the limit.
FibreTrunk Provides information for the bre channel trunk. The alerts provide information about the improper
cabling conguration for bre-channel trunking.
HostOS Provides information for the validity of the host operating system index.
IndividualDrive Provides status information of the path for the individual drive.
InterfaceCard Provides status information for the host interface card. The alerts provide information if the host
interface input/output card or the host interface card failed.
InterposerFW Provides information if the Interposer FW version is supported.
LinkSpeed Provides status information for the Link Speed (data rate) switch position.
OpticalLink Provides information about the optical link speed. The alerts provide information if the optical link
speed has failed.
PhysicalDisk Provides information about the physical disk read status.
PowerSupply Provides status information for power supply. The alerts provide information if the power supply is
missing or removed, failed or needs attention.
Processor Provides information about the processor memory for cache.
RedundantCanister Provides information about the redundant canister. The alerts provide information if the power
supply or cooling fan module is missing.
RemoteReplication Provides status information for the remote replication communication between the storage array
and the fabric with which it is connected.
ReservedBlock Provides status information for the discovery of the reserved blocks on SATA drives.
SAS Provides status information for the SAS host. SAS alerts provide information for the miswire,
degradation, overow detection, or invalid topology of the SAS host port, degradation or miswire
of the SAS-wide port, and so on.
SBB Provides validation information for the StorageWorks Building Block (SBB). The alerts provide
information for SBB validation for enclosure expansion, SIM/ESM canister, power supply, midplane
communication.
Security Provides information about the repository security compatibility.
SFP Provides information about the status of the GBIC/SFP.
SMARTCommandTransfer Provides information for the SMART Command Transfer support.
26 Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus