Users Guide

Alert Group Description
UserActions Provides information about all user action required for certain events.
vFlash Provides details of removable ash media and storage device.
vFlashAbsent Provides information if removable ash media is absent.
VoltageProbe Provides the voltage details of the processor module and system board.
Dell DRAC5 and iDRAC6 Alert Groups
The Dell DRAC5 and iDRAC6 alerts are the events generated by Dell DRAC5 or iDRAC6 devices and are displayed on the Netcool/
OMNIbus console. The following table lists the Dell DRAC5 and iDRAC6 alert groups.
Table 22. Dell DRAC5 and iDRAC6 Alert Groups
Alert Group Description
Authentication Provides status of the RAC Authentication failures and the threshold limit.
Battery Provides status information for batteries.
ESMCOmmunication Provides the status of the RAC communication with the Baseboard Management Controller.
Power Provides the information of the system power supply.
SELThreshold Provides the status information of the System Event Logs capacity.
SystemEventLog Provides the status of a new event arrival in the System Event Logs.
TemperatureProbe Provides temperature information of a system board, memory module, fan failure, and inlet of a system.
TestTrap Test trap.
VoltageProbe Provides the voltage details of the processor module and the system board.
WatchDog Provides the status information of the System Watchdog.
Dell Chassis Alert Groups
The Dell PowerEdge FX2 CMC, PowerEdge VRTX CMC, and M1000e devices generate the Chassis alerts and these alerts are displayed on
the Netcool/OMNIbus console. The following table lists the Dell Chassis alert groups.
Table 23. Dell Chassis Alert Groups
Alert Group Description
AmperageProbe Provides status information for current sensors.
Battery Provides status information for batteries.
Cable Indicates if cable is detected.
DellChassis
( M1000e alerts)
Status of various components such as fan, battery, power supply, temperature probe,
hardware log, redundancy, presence or absence of server, keyboard/video/ mouse
(KVM) switch, input output module (IOM), SD card, mismatch of fabric, and mismatch
of rmware version.
CMC Provides the information about the CMC slot.
Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 23