Users Guide

Alert Group Description
MultipleRAIDSets Provides information that multiple valid RAID sets are found.
NVRAMBatteryFailed Provides information that NVRAM battery has failed and the battery is not usable.
OpsPanelFailure Provides information that operations panel is missing or damaged.
PowerSupply Provides information that power supply module has detected a failure.
PowerSupplyFan Provides information that power supply module fan has failed.
RAIDLostCache Provides information that RAID driver is unable to recover the battery-backed cache.
RAIDOrphanCache Provides information that RAID driver found data in the battery-backed cache and does not have
a matching disk array.
RAIDSetDoubleFaulted Provides information that a double fault is detected in the RAID set.
RAIDSetLostBlkTableFull Provides information that RAID lost block table is full.
TempSensorThreshold Provides information that temperature sensor has exceeded the threshold.
DiskStatus Provides information that status of the EqualLogic disk has changed.
SCSITgtDevice Provides information that status of the EqualLogic SCSI target device has changed.
SCSILuStatus Provides information that status of the EqualLogic Logical Unit Number (LUN) has changed.
ISCSITgtLogin Provides information that the EqualLogic iSCSI target device's login attempt failed.
ISCSIIntrLogin Provides information that the initiator's login attempt failed.
ISCSIInstSession Provides information that the active session for a target system or an initiator failed.
Dell iDRAC7 and iDRAC8 Alert Groups
These alerts are the events generated by Integrated Dell Remote Access Controller 7 (iDRAC7) and Integrated Dell Remote Access
Controller 8 (iDRAC8) devices and displayed on the Netcool/OMNIbus console. The following table lists the iDRAC7 and iDRAC8 alert
groups.
Table 21. iDRAC7 and iDRAC8 Alert Groups
Alert Group Description
AmperageProbe Provides the amperage details of the system board, disk-drive bay, and the system level.
AutoDiscovery Provides information about the auto discovery conguration execution status.
AutomaticSystemRecovery Provides the OS watchdog timer details of the system.
Battery Provides the details of the system-board battery.
BIOSPOST Provides information about the memory performance during system BIOS Power-On Self Test
(POST).
CPUUsage Provides information about the CPU usage.
Debug Provides the debug authorization details of the system.
Fan Provides the fan details of the system.
FiberChannel Provides information about the status of the ber channel port.
Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 21