Users Guide
Alert Group Description
FluidCache Provides the validity information for the uid cache license. Fluid Cache alerts provide information
about the storage device installation with license, license removal, expired/invalid license, memory
availability, CFM connection, journal mirrors, cluster ID matching, journal read/write, missing cache
device and so on.
FluidCacheDisk Provides information about the LUN status of the uid cache disk.
PhysicalDisk Provides information about the operations on the physical disks such as rebuild, hot spare, blink, clear
operation, replace member operation, state change, drive write cache, drive log export, drive prepared
for removal, and full initialization.
PowerSupply Provides status information of the power supplies in an enclosure.
Redundancy Provides status of the redundancy device.
SystemLevel Provides status of the controllers in the system.
TemperatureProbe Provides temperature status of the probes in the enclosure. The temperature probe alerts help protect
critical components by alerting when temperatures become too high inside an enclosure.
VirtualDisk Provides status information of the virtual disk tasks. Virtual disk alerts provide information about
initialization, formatting, conguration, rebuild, background initialization, redundancy, and so on.
VirtualDiskPartition Provides information about the caching status of the virtual disk. Virtual disk partition alerts provide
information about inaccessible storage device, transient failure, enabled cache , disabled cache, cache
removal and so on.
Dell EqualLogic Alert Groups
The EqualLogic alerts are the events generated by Dell EqualLogic Storage Arrays and displayed on the Netcool/OMNIbus console. The
following table lists the EqualLogic alert groups.
Table 20. Dell EqualLogic Alert Groups
Alert Group Description
BatteryLessThan72Hours Provides information that the battery has insucient charge to survive a 72–hour power outage.
BothFanTraysRemoved Provides information that both fan trays of the member have been removed from the chassis.
ChannelBothFailed Provides information that both the channel cards have failed.
ChannelBothMissing Provides information that both the channel cards are missing.
EIPFailureCondition Provides information that EIP is failed in the channel card.
EmmLinkFailure Provides information that link to the EMM has failed.
EnclosureOpenPerm Provides information that enclosure is open for a long time.
FanSpeedThreshold Provides information that fan speed has exceeded the minimum or maximum threshold.
FanTrayRemoved Provides information that one of the fan trays has been removed from the chassis.
HighBatteryTemperature Provides information that battery temperature is high.
HwComponentFailedCrit Provides information that a critical hardware component of the member has failed.
IncompatControlModule Provides information that an incompatible control module is inserted into the chassis.
LowAmbientTemp Provides information that one or more sensors are within the critical temperature range.
20 Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus