Owner's Manual

- PDR85 : Security subsystem errors detected for <physical disk>.
- PDR86 : Bad block table on <physical disk> is full.
- PDR95 : Microcode update on <physical disk> has failed.
o PowerSupply Object Traps
- PSU1 : Power supply in <Enclosure name> was disrupted.
- PSU2 : The power supply in <Enclosure name> is switched OFF.
- PSU11 : Power supply in <Enclosure name> has failed.
Important Notes
To visit Dell TechCenter for accessing whitepapers, blogs, wiki-articles, Product
communities and forums, see: http://en.community.dell.com/techcenter/systems-
management/w/wiki/4115.dell-openmanage-connections-and-integrations.aspx
Known Issues
• The "eqlDiskStatusChange" trap with "diskStatus" 0 and "diskSlot" 0 is displayed on
the Netcool/OMNIbus console with severity as "Indeterminate" and summary as "The
status of the EqualLogic Disk ( 0 ) has changed to ( unknown )"
Note: This issue is applicable only to EqualLogic firmware version 5.x.
• OpenManage Server Administrator page will open when OpenManage Server
Administrator Web Server console tool is configured with an IPv4 address and is
launched from an event or trap having an IPv6 IP address as host name.
In such cases, User should click on the link "Manage Remote Node" and populate the
field "Hostname / IP address" with the managed node IP address.
Limitations
NA