Users Guide

Installing the Connection 11
Installing the Connection
The following sections describe the requirements for the management station or remote console
running Dell™ OpenManage™ Connection for Tivoli Enterprise Console
®
(hereafter referred to as
the Connection).
The procedure for installing the Connection is different for Dell OpenManage Server Administrator,
Dell OpenManage Server Administrator Storage Management, and Dell OpenManage Array Manager.
NOTE: Starting with Dell OpenManage 5.0, Dell OpenManage Array Manager is no longer an installable option. If
you have an Array Manager installation and need information on how to migrate from Array Manager to Storage
Management, refer to the product documentation prior to Storage Management 2.1 or Dell OpenManage 5.1.
Support for Array Manager has been withdrawn from the Dell PowerEdge™ Installation and Server
Management CD version 5.0 and later.
Server Administrator
Installing the Connection on the Host Where the TEC Event Server is Located
NOTE: Before installing the Connection, ensure that you back up the rule base.
1 If you are using Server Administrator version 1.8 and above, copy the dellomsa3.baroc file present
in the
Dell Server Administrator folder (this folder will be located in the directory to which you
downloaded and extracted the contents of the
TEC35A xx .exe file) to \Tivoli\bin\w32-ix86\bin .
NOTE: If you are using Server Administrator version 1.7 and below, copy the dellomsa2.baroc present in
the Dell Server Administrator folder (this folder will be located in the directory to which you downloaded
and extracted the contents of the TEC35Axx.exe file) to \Tivoli\bin\w32-ix86\bin.
2 Launch the Tivoli Desktop.
3 Stop the event server by right-clicking the EventServer icon and selecting Shut Down .
4 Double-click the EventServer icon to open the Event Server Rule Bases GUI.
5 Select Create → Rule Base .
6 In the fields provided, type a name for your rule base and the path where the dellomsa3.baroc
resides on your system.
NOTE: If you are using Server Administrator version 1.7 and below, use the path for dellomsa2.baroc.
7 Click Create & Close .
8 Right-click the active rule base and select Copy .
9 Select the new rule base you created as the destination rule base from the list.