Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/TEC/3.5/readme/readme.txt[10/19/2012 10:56:44 AM]
Connection for TEC Version 3.2.
A limitation exists for the number of characters displayed in the
event description field of the TEC Console. The maximum number of
characters that can be displayed is 255. If the text exceeds 255, word
truncation will occur.
Two events for Dell OpenManage Array Manager have event description
text that exceeds 255 characters.
The detailed description of these events are given below:
Event ID: 571
-------------
Class Name: Dell_OMAM_SCSI_SenseData
Severity: Warning
Description: %1, %2, Sense Key = %3, Sense Code = %4, Sense Qualifier
= %5, where %1, %2, %3, %4, and %5 will be replaced by the actual
controller and disk names.
If this disk is part of a redundant virtual disk, select the "Offline"
option and then replace the disk. Then, configure a hot spare and it
will start the rebuild process automatically. If this disk is a hot
spare, select the "Prepare to Remove" option and then replace the
disk. If this disk is part of a non-redundant disk, you should back up
your data immediately. If the disk fails, you will not be able to
recover the data.
Event ID: 671
-------------
Class Name: Dell_OMAM_PERC_ALERT_SCSI_SENSE_SECTOR_REASSIGN
Severity: Warning
Description: %1, %2, Sense Key = %3, Sense Code = %4, Sense Qualifier
= %5, Where %1, %2, %3, %4, and %5 will be replaced by the actual
controller and disk names.
If this disk is part of a non-redundant virtual disk, the data for
this block cannot be recovered. The disk will require replacement and
data restore. If this disk is part of a redundant virtual disk, the
data in this block will be reallocated.
**********************************************************************
Dell OpenManage Connection for Tivoli Enterprise Console (TEC)
Version 3.1
**********************************************************************
======================================================================
Supported Components