Owner's Manual

Alert Group Description
ChannelBothFailed Provides information that both the channel cards have
failed.
ChannelBothMissing Provides information that both the channel cards are
missing.
EIPFailureCondition Provides information that EIP is failed in the channel card.
EmmLinkFailure Provides information that link to the EMM has failed.
EnclosureOpenPerm Provides information that enclosure is open for a long
time.
FanSpeedThreshold Provides information that fan speed has exceeded the
minimum or maximum threshold.
FanTrayRemoved Provides information that one of the fan trays has been
removed from the chassis.
HighBatteryTemperature Provides information that battery temperature is high.
HwComponentFailedCrit Provides information that a critical hardware component
of the member has failed.
IncompatControlModule Provides information that an incompatible control module
is inserted into the chassis.
LowAmbientTemp Provides information that one or more sensors are within
the critical temperature range.
MultipleRAIDSets Provides information that multiple valid RAID sets are
found.
NVRAMBatteryFailed Provides information that NVRAM battery has failed and
the battery is not usable.
OpsPanelFailure Provides information that operations panel is missing or
damaged.
PowerSupply Provides information that power supply module has
detected a failure.
PowerSupplyFan Provides information that power supply module fan has
failed.
RAIDLostCache Provides information that RAID driver is unable to recover
the battery-backed cache.
RAIDOrphanCache Provides information that RAID driver found data in the
battery-backed cache and does not have a matching disk
array.
RAIDSetDoubleFaulted Provides information that a double fault is detected in the
RAID set.
RAIDSetLostBlkTableFull Provides information that RAID lost block table is full.
TempSensorThreshold Provides information that temperature sensor has
exceeded the threshold.
12