Owner's Manual

18 Installing Dell OpenManage Connection for Netcool/OMNIbus
b Navigate to Menu Configuration .
c Select Alerts under Available Menus on the right pane.
d Click Modify .
e Select Menu from the Available items drop-down list.
f Add Dell Tools to the Current items .
g Click Save .
2 Refresh the Active Event List to synchronize the newly added menu items.
3 Verify that the Dell Tools  Launch Dell Server Administrator Console,
Launch Dell Server Administrator Web Server Console,
and the Launch
Dell EqualLogic Group Manager Console
menu options are available for
the events received from Dell devices.
Configuring Dell Tools Menu
When you import the Web GUI Integration, and both EqualLogic and Dell
Server integration co-exists, the associations are lost between Dell tools and
the Dell Tools menu.
To configure the menu for Dell Tools:
1
Log in to the Web GUI.
2 Click Administration  Event Management Tools .
3 Select Menu Configuration .
4 In Available menus , select DellTools , and click Modify .
5 From the Available items drop-down menu, click tool .
6 Select the required tool to associate with the Dell Tools Menu and move
the tool to the
Current items.
7 Select the tool from the Current items and click Rename .
The
Rename Menu Item Window is displayed.
8 Change the Label name to the corresponding Dell Tool name.
9 Click Save and close the window.
10 Save and close the Menu Editor window.
11 Follow the preceding steps to configure the Dell Tools with the Alert
menu.
A5_bk0.book Page 18 Thursday, September 22, 2011 7:52 PM