Owner's Manual

14 Using the Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus
Understanding Event Severity
The events forwarded to the ObjectServer are displayed on the
Netcool/OMNIbus console with one of the following severities:
• Normal — Event with successful operation of a component, such as a
power supply turning on, or a sensor reading returning to normal.
•
Warning — Event that is not necessarily significant, but may indicate a
possible future problem, such as crossing a warning threshold.
MultipleRAIDSets Provides information that multiple valid RAID sets were
found.
NVRAMBatteryFailed Provides information that NVRAM battery has failed and
can no longer be used.
OpsPanelFailure Provides information that ops panel is missing or
damaged.
PowerSupply Provides information that Power Supply module has
detected a failure.
PowerSupplyFan Provides information that Power Supply module fan has
failed.
RAIDLostCache Provides information that RAID driver is unable to
recover the battery-backed cache.
RAIDOrphanCache Provides information that RAID driver found data in the
battery-backed cache and does not have a matching disk
array.
RAIDSetDoubleFaulted Provides information that double fault has been detected
in the RAID set.
RAIDSetLostBlkTableFull Provides information that RAID lost block table is full.
TempSensorThreshold Provides information that temperature sensor has
exceeded the maximum or minimum threshold.
DiskStatus Provides information that status of the EqualLogic disk
has changed.
Table 2-3. EqualLogic Alert Groups
(continued)
Alert Group Description