Owner's Manual

ManualsBrandsDell ManualsSoftwareDell OpenManage Connection For CA Unicenter Version 3.4

Error Messages 19

Error Messages

Table 3s-1 lists the error messages that may be displayed while using the

OpenManage Connection and the actions that you can take to resolve them.

Table 3-1. Connection Error Messages

Error Message Cause Action

CA NSM installation

is not found. Setup

cannot continue.

The OpenManage

Connection installer is

unable to detect the

installation of CA NSM

r11.1 SP2, CA NSM r11.2

CUM1, CA NSM r11.2

SP1 or CA NSM r11.2

SP2.

Install CA NSM r11.1 SP2,

CA NSM r11.2 CUM1, CA

NSM r11.2 SP1 or CA

NSM r11.2 SP2 respectively

before proceeding with the

installation of the

OpenManage Connection

version 3.4.

Dell Openmanage

CA Connection is not

supported on the

NSM installation.

You may be trying to

install the OpenManage

Connection on NSM

other than version CA

NSM r11.1 SP2, CA NSM

r11.2 CUM1, CA NSM

r11.2 SP1, CA NSM r11.2

SP2.

Uninstall the earlier version

of the CA NSM and install

one of the CA NSM 11.1

SP2 / 11.2 CUM1 / 11.2

SP1 / 11.2 SP2

OpenManage Connection

and install version 3.4 .

The installation requires

NSM DSM or NSM WV

or NSM EM,

Aborting setup.

You do not have the

Distributed State

Machine (DSM),

WorldView (WV), or

Event Management (EM)

component installed on

your system.

Install the DSM, WV,

or EM components of

CA NSM. For more

information, see the Dell

OpenManage Version 3.4

for CA NSM Installation

Guide.