Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/CA_Connections/CA_3.3/en/UG/readme/Readme.txt[10/26/2012 2:47:59 PM]
seen on using MCC over a period of time.An issue has been opened on
CA support line.
* Deleting a managed node discovered using one IP address and
re-discovering the node using another IP address, will no longer
group the device under “Dell Managed Systems” group. In this scenario,
if the first IP address is not reachable, the Dell agents will not be
displayed under the node on MCC or 2D Map. Restarting awservices may
solve this issue. An issue has been opened on CA support line.
* The severity of Dell agents for ANY:ABSENT_ACK status is inconsistent
with that of CA agents. While the former shows “Warning”, the CA agents
will show “Minor”.
######################################################################
DOCUMENTATION UPDATES
######################################################################
* In Section 2 "System Requirements" Table 2-1 “Systems Management
Software Supported” of the user guide, for Out-of-band DRAC4, In-band
RAC(DRAC5, DRAC4), Out-of-band DRAC/MC - all firmware versions mean
all the firmware versions supported between Dell OpenManage version
5.3 to 6.1 and for Out-of-band DRAC5 all the firmware version from
1.45 to the firmware versions supported till OM 6.1.
* In Section 4 "Using the Connection" in the Table 4-1 of the user guide.
DSM and WV Agents, and Class Names - Dell agent for the DSM Class Name
DellServerAdmin is Server Administrator and for the DSM Class Name
DellStorageManager is Server Administrator Storage Management Service.
* In section 5 "Error Messages" of the user guide, for the error message
"Dell Openmanage CA Connection is not supported on the NSM installation"
- the corrective Action is "Install the correct version of NSM and then
install Dell Openmanage CA Connection"
######################################################################
HISTORY
######################################################################
This section provides historical information about the new features
and fixes that were implemented in previous versions of the
Connection.
**********************************************************************
DELL OPENMANAGE CONNECTION FOR CA NSM, VERSION 3.2
**********************************************************************
######################################################################
RELEASE HIGHLIGHTS
######################################################################