Users Guide

For example:

java –jar dell_OMC_ITNM_ConfigUtility_v_2_0.jar -monitorinband=enable

java –jar dell_OMC_ITNM_ConfigUtility_v_2_0.jar -monitorinband=disable

NOTE: If an ESXi system has IPv4 and IPv6 address and both of them are discovered, the addresses

appear as different managed nodes under the

Dell Managed Systems → ESXi Workstations. You

can avoid the redundant service tag by excluding these IP addresses in the discovery configuration.

If the IPv6 address of a Dell workstations running ESXi is configured as a seed in the ITNM IP Edition,

then the trap association will not occur. To view the trap association, discover the Dell workstations

running ESXi using an IPv4 address.

Discovering and Classifying Dell iDRAC7 or iDRAC8

Devices

Make sure the DellOOBServer discovery agent is enabled for discovering Dell iDRAC7 and iDRAC8

devices. DCLM must be installed and configured, and the DCLM parameters must be configured in the

ITNM IP Edition core server using the Config Utility.

For more information on DCLM features, see Licensing

For more information on configuring the DCLM parameters, see the Dell OpenManage Connection

Version 2.0 for IBM Tivoli Network Manager IP Edition Installation Guide.

The discovered Dell 13G OOB servers (iDRAC8) are classified under the DelliDRAC8 class name.

The discovered Dell 12G OOB servers (iDRAC7) are classified under the DelliDRAC7 class name.

In the left pane on the Tivoli Integrated Portal (TIP), click Availability → Network Availability → Network

Views → Dell Managed Systems. The Dell Managed Systems pane is displayed on the right-hand side.

For more information, see Viewing Dell Devices.

Discovering and Classifying DRAC5 Devices

Make sure the DellDRAC discovery agent is enabled for full and partial discovery of Dell DRAC5 devices.

The discovered DRAC5 devices are classified under the DellDRAC5 class name.

In the left pane on TIP, click Availability → Network Availability → Network Views → Dell Managed

Systems. The Dell Managed Systems pane is displayed on the right-hand side. For more information, see

Viewing Dell Devices.

Discovering and Classifying iDRAC6 Devices

Make sure the DellDRAC discovery agent is enabled for partial and full discovery of Dell iDRAC6

monolithic and modular devices.

The discovered iDRAC6 devices are classified under the DelliDRAC6 class name.