User's Manual

3. The discovered DCLM node will appear in the right pane only when the alert type is 'critical' or 'warning' for that

node.

Viewing Dell EqualLogic Storage Arrays

1. Perform the steps described in Viewing Dell Devices in Topology View.

2. Under Dell Managed Systems, click Dell Storage → EqualLogic PS Arrays.

3. Expand EqualLogic PS Arrays to view the group IPs of the discovered EqualLogic member devices.

4. Expand the group IPs to view the storage pools associated with the EqualLogic members devices.

5. Click the storage pool to view all the EqualLogic members that are part of the storage pool, in the right pane.

Viewing Dell PowerVault MD Storage Arrays

1. Perform the steps described in Viewing Dell Devices in Topology View.

2. Under Dell Managed Systems, click Dell Storage → MD Arrays.

3. Click MD Arrays to view the discovered Dell PowerVault MD Storage Arrays in the right pane.

Associating Servers with DRAC/MC Systems

You can view and monitor the health of the discovered in-band modular servers that are associated with DRAC/MC

systems, in the Network View of TIP.

1. On TIP, click Availability → Network Availability → Network View → Dell Managed Systems → Dell Chassis →

DRACMC.

2. Expand DRACMC to view the IP address of the DRAC/MC systems.

The service tags of the Dell servers associated with the DRAC/MC systems are displayed under the chassis tag of

the DRAC/MC systems.

3. Click a service tag to view the associated managed nodes, on the right-hand side.

NOTE: If a modular server and its DRAC/MC association is changed after the discovery, then the modular

server has to be rediscovered to show their correct association.

Associating Servers With CMC Devices

You can view and monitor the health of the discovered in-band or out-of-band modular servers and their corresponding

RACs that are associated with CMC devices, in the Network View of TIP.

1. On TIP, click Availability → Network Availability → Network View → Dell Managed Systems → Dell Chassis →

CMC.

2. Expand CMC to view the service tags of the discovered Dell servers associated with the CMC devices.

3. Click a service tag to view the managed nodes of the associated servers, in the right pane.

NOTE: If a modular server and its CMC association is changed after the discovery, then the modular server

and the associated RAC has to be rediscovered to show their correct association.