Reference Guide

Property Description

• 13 = Frame Relay

• 14 = Ethernet

• 15 = TokenRing

• 16 = FDDI

• 17 = Infiniband

• 18 = Fibre Channel

• 19 = ISDN BRI Endpoint

• 20 = ISDN B Channel Endpoint

• 21 = ISDN D Channel Endpoint

• 22 = IPv4/v6

• 23 = BGP

• 24 = OSPF

• 25 = MPLS

• 26 = UDP

• 27 = TCP

RequestedState

An integer enumeration that indicates the last requested or

desired state for the element, irrespective of the mechanism

through which it was requested. The actual state of the

element is represented by EnabledState. This property is

provided to compare the last requested and current enabled or

disabled states.

Possible values are:

• 0 = Unknown - Indicates the last requested state for

the element is unknown.

• 2 = Enabled

• 3 = Disabled

• 4 = Shut Down

• 5 = No Change

• 6 = Offline - Indicates that the element has been

requested to transition to the Enabled but Offline

EnabledState.

• 7 = Test

• 8 = Deferred

• 9 = Quiesce

• 10 = Reboot - Refers to doing a "Shut Down" and then

moving to an "Enabled" state.

• 11 = Reset - Indicates that the element is first

"Disabled" and then "Enabled".

• 12 = Not Applicable

• .. = DMTF Reserved

• 32768..65535 = Vendor Reserved

NOTE: When EnabledState is set to 5 ("Not Applicable"),

then this property has no meaning. See the EnabledState

property description for explanations of the values in the

RequestedState enumeration.