Reference Guide

Property Description
• 2 = Degraded - Indicates the ManagedElement is
functioning below normal.
• 3 = Error - Indicates the ManagedElement is in an
Error condition.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
ProductCode
Product code of this monitor.
RequestedState
An integer enumeration that indicates the last requested or
desired state for the element, irrespective of the mechanism
through which it was requested. The actual state of the
element is represented by EnabledState. This property is
provided to compare the last requested and current enabled
or disabled states. Note that when EnabledState is set to 5
("Not Applicable"), then this property has no meaning. Refer
to the EnabledState property description for explanations of
the values in the RequestedState enumeration. "Unknown"
(0) indicates the last requested state for the element is
unknown.
NOTE: The value "No Change" (5) has been deprecated
instead of indicating the last requested state is
"Unknown" (0). If the last requested or desired state is
unknown, RequestedState should have the value
"Unknown" (0), but may have the value "No Change"
(5).Offline (6) indicates that the element has been
requested to transition to the Enabled but Offline
EnabledState. There are two new values in
RequestedState that build on the statuses of
EnabledState. These are "Reboot" (10) and "Reset" (11).
Shut Down requests an orderly transition to the
Disabled state, and may involve removing power, to
completely erase any existing state. The Disabled state
requests an immediate disabling of the element, such
that it will not execute or accept any commands or
processing requests. This property is set as the result of
a method invocation (such as Start or StopService on
CIM_Service), or can be overridden and defined as
WRITEable in a subclass. The method approach is
considered superior to a WRITEable property, because
it allows an explicit invocation of the operation and the
return of a result code. If knowledge of the last
RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the
value 12 "Not Applicable".
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline
38