Reference Guide

Dell_BootDeviceSequence
Property Description
BootDeviceName
The name of this boot device as specified by the BIOS.
BootOrder
The order of this device in the boot device priority list.
Possible values are:
• 1 = This device is the first in the list
• 2 = This device is the second in the list, and so on.
DellInstanceID
Index used to identify this boot device.
Status
Set to Enabled if this device is enabled in the boot sequence, Set to Disabled
if this device is disabled in the boot sequence.
Possible values are:
• 0 = Disabled
• 1 = Enabled
Dell_Configuration
Property Description
ACPowerRecoveryMode
This attribute allows the setting of the AC Power Recovery Mode in BIOS.
Unsupported means that this system BIOS does not support the setting of the
AC Power Recovery Mode.
Possible values are:
• 1 = Other
• 2 = Unsupported
• 3 = Off
• 4 = Last
• 5 = On
BootPasswordVerification
This property indicates if the Boot verification password is enabled on the
system or not enabled. If the Boot verification password is disabled by
jumper then the same is also displayed.
Possible values are:
• 0 = Password is installed
• 3 = Password disabled by jumper
• 4 = Password not enabled
Caption
The caption of the device.
Description
A short description of the device.
EnableDisableBIS
This property allows the enabling/disabling of the Boot Integrity Services
(BIS) in BIOS. Unsupported means that this system BIOS does not support
BIS.
Possible values are:
• 1 = Other
• 2 = Unsupported
• 3 = Accept
317