Reference Guide

Property Description
• 12 = Air Flow
Status
This property indicates the current status of the logical device.
Possible values are:
• 0 = OK
• 1 = Error
• 2 = Degraded
• 3 = Unknown
• 4 = Pred Fail
• 5 = Starting
• 6 = Stopping
• 7 = Service
• 8 = Stressed
• 9 = NonRecover
• 10 = No Contact
• 11 = Lost Comm
• 12 = Stopped
SystemCreationClassName
The scoping System's Creation class name.
SystemName
The scoping System's Name.
UnitModifier
The unit multiplier for the values returned by this Sensor.
UpperThresholdCritical
The Sensor's threshold values specify the ranges (min and max values) for
determining whether the Sensor is operating under Normal, NonCritical,
Critical or Fatal conditions. If the CurrentReading is between
UpperThresholdCritical and UpperThresholdFatal, then the CurrentState is
Critical.
UpperThresholdFatal
The Sensor's threshold values specify the ranges (min and max values) for
determining whether the Sensor is operating under Normal, NonCritical,
Critical or Fatal conditions. If the CurrentReading is above
UpperThresholdFatal, then the CurrentState is Fatal.
UpperThresholdNonCritical
The Sensor's threshold values specify the ranges (min and max values) for
determining whether the Sensor is operating under Normal, NonCritical,
Critical or Fatal conditions. If the CurrentReading is between
LowerThresholdNonCritical and UpperThresholdNonCritical, then the Sensor is
reporting a normal value. If the CurrentReading is between
UpperThresholdNonCritical and UpperThresholdCritical, then the CurrentState
is NonCritical.
Configuration
This section provides information about configuring boot device, hard disk drive sequence, password, internal speaker,
power, and so on.
316