Reference Guide

Property Description
• 2 = Communication OK - indicates communication is
established with the element, but does not convey
any quality of service.
• 3 = Lost Communication - Indicates that the
Managed Element is known to exist and has been
contacted successfully in the past, but is currently
unreachable.
• 4 = No Contact - Indicates that the monitoring
system has knowledge of this element, but has never
been able to establish communications with it.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
CompositSyncSignalOnGreenVideoSupported
Composite Sync Signal on Green video is supported.
CompositSyncSignalOnHorizontalSupported
Composite Sync Signal on Horizontal is supported.
ContinuousFrequency
For EDID 1.3, this bit indicated support for or no support for
GTF(using the default GTF parameter values). For EDID 1.4
this bit has been redefined to indicate Continuous
frequency(1) or Non-Continuous Frequency(0).
Contrast
This property represents the contrast of the video output.
The property value is from 0 to the MaxContrast property
value. If the Contrast property is implemented but the
contrast is unknown at the time, the property has a value
0x80000000.
CreationClassName
Indicates the name of the class or the subclass used in the
creation of an instance. When used with the other key
properties of this class, this property allows all instances of
this class and its subclasses to be uniquely identified.
CurrentResolutionH
This property indicated the current horizontal resolution in
pixels.
CurrentResolutionV
This property indicated the current vertical resolution in
pixels.
Description
Provides a textual description of the object.
DeviceID
An address or other identifying information used to uniquely
name the LogicalDevice.
DisplayCharacteristics
This array property represents various characteristics of a
video output device. value.
• StandbyModeSupported: the video output device
can go into a stand by mode,
• SuspendModeSupported: the video output device
can go into a suspend mode,
• VeryLowPowerSupported: the video output go into a
very low power mode. If DisplayCharacteristics is
implemented but the value is unknown, the property
has an Unknown
Possible values are:
• 0 = Unknown
• 2 = StandbyModeSupported
• 3 = SuspendModeSupported
31