Reference Guide

Property Description
value exceeds some value, for instance, 10%, some action must be taken (for
instance, fully discharge then fully charge the battery) within some specified
time (for instance, within two recharge cycles of the battery). If the action is not
taken within the time frame, the error value will continue to rise. If this property
is not supported, value = -1
Name
The Name property defines the label by which the object is known. When
subclassed, the Name property can be overridden to be a Key property.
RemainingCapacity
The battery's remaining capacity in mWatt-hours. This value is used with
Design Capacity or Full Charge Capacity to calculate fuel gauge information.If
this property is not supported, value = -1.
SerialNumber
The serial number for this battery.
SmartBatteryVersion
The Smart Battery Data Specification version number supported by this Battery.
If the Battery does not support this function, the value should be left blank.
Status
This property indicates the current status of the logical device.
Possible values are:
• OK
• Error
• Degraded
• Unknown
• Pred Fail
• Starting
• Stopping
• Service
• Stressed
• NonRecover
• No Contact
• Lost Comm
• Stopped
SystemCreationClassName
The scoping System's Creation class name.
SystemName
OK Error Degraded Unknown Pred Fail Starting Stopping Service Stressed
NonRecover No Contact Lost Comm Stopped
Dell_Chassis
Property Description
AssetTag
The Asset Tag of the system.
BootupState
The current state of this system when it booted.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = OK
• 4 = Warning
• 5 = Critical
• 6 = Non-Recoverable
284