Reference Guide

Property Description
storage can degrade integrity by reducing the ability to save
state. ) "Consumes" may be used alone or in conjunction with
other values, in particular, "Degrades Performance" and
"Degrades Integrity". "Manages" and not "Consumes" should be
used to reflect allocation services that may be provided by a
Service.
• 7 = Enhances Integrity - The Service may enhance integrity of
the associated element.
• 8 = Degrades Integrity - The Service may degrade integrity of
the associated element.
• 9 = Enhances Performance - The Service may enhance
performance of the associated element.
• 10 = Degrades Performance - The Service may degrade
performance of the associated element.
• .. = DMTF Reserved
• 0x8000..0xFFFF = Vendor Reserved
OtherElementEffectsDescriptions
Provides details for the effect at the corresponding array position in
ElementEffects. This information is required if ElementEffects contains
the value 1 (Other).
DCIM_AssociatedPowerManagementService
Property Description
OtherPowerState
A string describing the additional power management state of the
element, used when the PowerState is set to the value 1, "Other".
OtherRequestedPowerState
A string describing the additional power management state of the
element, used when the RequestedPowerState is set to the value
1, "Other".
PowerOnTime
The time when the element will be powered on again, used when
the RequestedPowerState has the value 2, "On", 5, "Power Cycle
(Off - Soft)" or 6, "Power Cycle (Off - Hard)".
PowerState
The current power state of the associated Managed System
Element.
Possible values are:
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Off - Soft Graceful
• 13 = Off - Hard Graceful
272