Reference Guide

Property Description
• 3 = Is Next For Single Use
IsPending
An enumerated integer that indicates whether or not the
referenced CIM_SettingData instance represents
outstanding changes to the configuration of the
referenced CIM_ManagedElement that are known to be
pending and are in the process of being applied. A value
of 0 "Unknown" indicates that the referenced instance of
CIM_SettingData may represent the last configuration
applied to the referenced CIM_ManagedElement. A value
of 2 "Is Pending" indicates that the referenced instance of
CIM_SettingData represents outstanding changes to the
configuration of the referenced CIM_ManagedElement
that are known to be pending. A value of 3 "Is Not Pending"
indicates that the referenced instance of CIM_SettingData
does not represent outstanding changes to the
configuration of the referenced CIM_ManagedElement.
Possible values are:
• 0 = Unknown
• 2 = Is Pending
• 3 = Is Not Pending
• .. = DMTF Reserved
• 32768.. = Vendor Reserved
ManagedElement
The managed element.
SettingData
The SettingData object that is associated with the
element.
DCIM_OrderedMemberOfCollection
Property Description
AssignedSequence
AssignedSequence is an unsigned integer 'n' that
indicates the relative position of members within a
Collection. When 'n' is a positive integer, it indicates a
place in the sequence of members, with smaller integers
indicating earlier positions in the sequence. The special
value '0' indicates 'don't care'. If two or more members
have the same non-zero sequence number, then the
ordering between those members is irrelevant, but they
must all be ordered at the appropriate place in the overall
sequence. A series of examples will make ordering of
members clearer: If all members have the same sequence
number, regardless of whether it is '0' or non-zero, any
order is acceptable. The values are: 1:MEMBER A
2:MEMBER B 1:MEMBER C 3:MEMBER D indicate two
acceptable orders: A,C,B,D or C,A,B,D, because A and C
can be ordered in either sequence, but only at the '1'
position.
269