Reference Guide

Property Description
Name> structure of Schema class names.) In addition, to
ensure uniqueness, <OrgID> must not contain a colon (:).
When using this algorithm, the first colon to appear in
InstanceID must appear between <OrgID> and <LocalID> .
<LocalID> is chosen by the business entity and should not
be reused to identify different underlying (real-world)
elements. If the above "preferred" algorithm is not used,
the defining entity must assure that the resulting
InstanceID is not reused across any InstanceIDs
produced by this or other providers for the NameSpace of
this instance. For DMTF-defined instances, the "preferred"
algorithm must be used with the <OrgID> set to
CIM.LocalOnly.
LocalOnly
This property shows if the events from this the event
source should be reported to the local indication
consumer only or should be reported to CIMOM as an
indication. TRUE for reporting to local consumer only, and
FALSE for reporting as an indication.
MaxDisplayNotifications
The maximum number of indications of this type that will
be sent to the local display.
MaxNTEventLogNotifications
The maximum number of indications of this type that will
be sent to the local display.
Name
The label by which the Configuration object is known.
OtherAlertType
A string describing the Alert type - used when the Alert
type property is set to 1, "Other State Change".
PollEnabled
This property shows if status-polling of the event source is
enabled or not. TRUE for enable, and FALSE for disabled.
PollingInterval
The polling interval for event source, in seconds.
ProbableCause
An enumerated value that describes the probable cause
of the situation which resulted in the AlertIndication.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Adapter/Card Error
• 3 = Application Subsystem Failure
• 4 = Bandwidth Reduced
• 5 = Connection Establishment Error
• 6 = Communications Protocol Error
• 7 = Communications Subsystem Failure
• 8 = Configuration/Customization Error
• 9 = Congestion
• 10 = Corrupt Data
• 11 = CPU Cycles Limit Exceeded
• 12 = Dataset/Modem Error
• 13 = Degraded Signal
• 14 = DTE-DCE Interface Error
• 15 = Enclosure Door Open
• 16 = Equipment Malfunction
223