Reference Guide

Property Description
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
PrimaryStatus
Provides a high level status value, intended to align with Red-
Yellow-Green type representation of status. It should be used in
conjunction with DetailedStatus to provide high level and detailed
health status of the ManagedElement and its subcomponents.
Possible values are:
• 0 = Unknown - Indicates the implementation is in general
capable of returning this property, but is unable to do so at
this time.
• 1 = OK - Indicates the ManagedElement is functioning
normally.
• 2 = Degraded - Indicates the ManagedElement is
functioning below normal.
• 3 = Error - Indicates the ManagedElement is in an Error
condition.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
RequestedState
An integer enumeration that indicates the last requested or
desired state for the element, irrespective of the mechanism
through which it was requested.
Possible values are:
• 0 = Unknown - Indicates the last requested state for the
element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline - Indicates that the element has been requested
to transition to the Enabled but Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot - Refers to doing a "Shut Down" and then
moving to an "Enabled" state.
• 11 = Reset - Indicates that the element is first "Disabled"
and then "Enabled".
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
The actual state of the element is represented by EnabledState.
This property is provided to compare the last requested and
current enabled or disabled states. Note that when EnabledState is
set to 5 ("Not Applicable"), then this property has no meaning. Refer
to the EnabledState property description for explanations of the
values in the RequestedState enumeration.
195