Reference Guide

Property Description
If knowledge of the last RequestedState is not supported
for the EnabledLogicalElement, the property is NULL or has
the value 12 "Not Applicable".
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change - Indicates that no transition is in
progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable - Indicates the implementation
does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
SetBIOSAttributes (Method)
This method is called to modify a group of BIOSAttribute
instances associated with this BIOSService. If the method
is not supported by the implementation, 1 (Not Supported)
shall be returned. If the method is supported, but has not
completed due to an unspecified error, 2 (Error) shall be
returned. If the method is supported and has completed
successfully, 0 (Completed with No Error) shall be
returned. The method may return an instance of
CIM_Error.
RemoteBIOSUpdate (Method)
This method is called to remotely update the BIOS image. It
takes the hdr file of the bios image as the only parameter.
DCIM_SoftwareInstallationService
Property Description
CreationClassName
Indicates the name of the class or the subclass that is used in the
creation of an instance. When used with the other key properties of
this class, this property allows all instances of this class and its
subclasses to be uniquely identified.
EnabledDefault
An enumerated value indicating an administrator's default or
startup configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
181