Reference Guide

Property Description
EnabledDefault
An enumerated value indicating an administrator's default
or startup configuration for the Enabled State of an
element. By default, the element is "Enabled" (value=2).
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
EnabledState
An integer enumeration that indicates the enabled and
disabled states of an element. It can also indicate the
transitions between these requested states. For example,
shutting down (value=4) and starting (value=10) are
transient states between enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled - Indicates that the element is or could
be executing commands, will process any queued
commands, and queues new requests.
• 3 = Disabled - Indicates that the element will not
execute commands and will drop any new
requests.
• 4 = Shutting Down - Indicates that the element is in
the process of going to a Disabled state.
• 5 = Not Applicable - Indicates the element does
not support being enabled or disabled.
• 6 = Enabled but Offline - Indicates that the element
may be completing commands, and will drop any
new requests.
• 7 = In Test - Indicates that the element is in a test
state.
• 8 = Deferred - Indicates that the element may be
completing commands, but will queue any new
requests.
• 9 = Quiesce - Indicates that the element is enabled
but in a restricted mode.
• 10 = Starting - Indicates that the element is in the
process of going to an Enabled state. New
requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and
provides an indication of the functionality that is managed.
This functionality is described in more detail in the
Description property of the object.
179